Posted by Josh Taylor on October 24, 2014 at 12:00 AM UTC

First make sure you have fully installed your Z3 system and power the unit on. You will hear the control head beep a few times in a row once the unit is powered.


To adjust the backlighting simply press and hold the left or right arrow key on the arrowstik pad of the control head. Once in adjustment mode you can press either the left or right arrow keys to adjust the backlighting to your desired level.


To adjust the PA volume simply press and hold the PA mic trigger. While holding the PA mic trigger simply press and hold the left or right arrow key on the arrowstik pad of the control head. Once in adjustment mode you can press either the left or right arrow keys to adjust the PA volume to your desired level.


To adjust the RRB volume you must first have RRB set to one of your AUX switches and then turn RRB on. Once RRB is on just simply press and hold the left or right arrow key on the arrowstik pad of the control head. Once in adjustment mode you can press either the left or right arrow keys to adjust the RRB volume to your desired level.

Code 3 Adjusting Backlighting and PA/RRB Volume on a Z3 System

A PHP Error was encountered

Severity: Notice

Message: Undefined index: HTTP_ACCEPT_LANGUAGE

Filename: views/_header.php

Line Number: 42


Emergency/Warning Vehicle Lighting & Sirens
0

Adjusting Backlighting and PA/RRB Volume on a Z3 System

#
#



# # #
Follow Code3:
Share Code3: